Olimpia splendid B0970 Manual De Uso página 11

Wiring figure
• Connect the male joint of the connection cables group-1 to the main-
board, then connect the other side of the connection cables group-1
to the 4-pole screened cable of the smart port.
• If it is desired to extent the wire, please use an extension cord (pur-
chased separately).
4-core shielding wire
Remove the upper part of wire controller
• Insert a flat bladed screwdriver inside the slots in the lower part of the
smart port (2 slots) and remove the upper part.
NOTICE _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Pay attention not to dam-
age the Smart port with
the flat bladed screw-
driver.
LCAC
Extension
The connective
wires group-1
Mainboard
CN40 or CN49
or other speci-
fied ports
Slots
EN - 5