Probuilder 49008 Manual De Instrucciones página 50

g. If dust extraction or dust collection
devices are � tted to the power tool,
make sure that they are � tted and
used correctly. Using dust extraction or
collection can reduce the risks caused by
dust.
4) Using the power tool
a. Do not overload the power tool. Only use
the power tool for the purpose for which
it was designed. You will work better and
more safely with the appropriate power
tool.
b. Do not use the power tool if the on/off
button is defective. Power tools that
can no longer be turned on and off are
dangerous and must be repaired.
c. Remove the plug from the electrical
socket before making any adjustments to
the power tool, replacing accessories or
putting the tool into storage in order to
avoid unintentional start-up.
d. Store power tools out of the reach of
children when not in use. Do not give the
power tool to people who are not familiar
with it or who have not read these
instructions. Power tools are dangerous if
used by inexperienced people.
50
e. The power tool must be properly
maintained. Check before each use that
the moving parts of the power tool
operate smoothly and are not sticking.
Also check that the parts of the power
tool are not broken or damaged so that
its function is impaired. Get damaged
parts replaced or repaired before using
the power tool. Many accidents are the
result of poorly maintained power tools.
f. Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to get
stuck and are easier to control.
g. Use power tools, accessories, tool
bits, etc. in accordance with these
instructions. Take into account the
working conditions and the work to
be performed. Hazardous situations
can arise if the power tool is used for
purposes for which it was not designed.
5) Maintaining the power tool
a. To ensure safety when working with a
power tool, it should only be repaired at a
quali� ed workshop and only with original
spare parts.