Introduction - Nussbaum SPRINTER MOBIL 2500 Instrucciones De Servicio

1

Introduction

Nußbaum products are a result of many years
of experience. A high quality standard and superior
concept guarantees you reliability, long lifetimes
and economical operation. To prevent unneces-
sary damage and hazards, read this operating
manual carefully and always comply with its con-
tents.
Any other use, or use beyond purpose is
!
considered improper.
Otto Nußbaum GmbH & Co.KG is not liable for
!
any resulting damage. The operating company
alone carries the risk.
Proper use also includes:
• Adherence to all instructions in this operating
manual.
• Compliance with inspection and maintenance
work and the inspections stipulated.
• The operating manual is to be followed by all per-
sonnel working on the system. This is notably with
regards to Section 3 "Safety conditions."
• In addition to safety information from the
operating manual, comply with rules and regula-
tions at the location of use.
• Proper system handling.
Operating company obligations:
The operating company is obliged to only permit
personnel to work on the system who
• Understand the principle regulations about work
safety and accident prevention and who have
been trained in working with the system.
• Have read the safety section and warning infor-
mation in this operating manual, have under-
stood it and confi rmed learning with a signature.
AD H9451 12.06.2015 SPRINTER MOBIL - HYMAX PRO
Hazards in working with the system:
Nußbaum products have been designed and
built to state-of-the-art and to recognized safety
standards. However, improper use may lead
to hazards to life and limb of the user or result in
property damage.
The system may only be operated
• For proper intended use
• If it is technically in perfect condition
Organizational measures
• The operating manual is always to be kept ready
at the location of use of the system.
• Supplemental to the operating manual, refer to
and comply with generally valid legal and other
binding regulations for accident prevention and
for environmental protection.
• Check occasionally that personnel have an
awareness of hazards and safe work in compli-
ance with the operating manual!
• Use personal protective equipment as needed or
required by regulations.
• All safety and hazard information on the system is
to be kept in a legible condition!
• Replacement parts must meet technical specifi -
cations of the manufacturer. This is only guaran-
teed for original parts.
• Deadlines pre-set or given in the operating
manual for repeating tests / inspections must be
followed.
Maintenance work, error removal
• Comply with pre-determined setting, main-
tenance and inspection work and intervals
in the operating manual, including details for
exchanging parts / part fi ttings! These activities
may only be done by specialists who have par-
ticipated in a special factory training.
51