GYS DUST SELF EXTRACTOR Manual De Instrucciones página 13

Operating manual
SANDING MACHINE
Direct mounting can be done on the sander.
A pneumatic sander (not included) with a Ø32 mm suction nozzle connects to the hoover. It can also be connected to
the pneumatic network via the automatic nozzle included in the suction hose.
Lever in position :
ON: Continuous operation of the hoover.
AUTO: Sander is on, hoover is on.
The sander is switched off, the hoover is switched off.
Note: When using a sanding block (not motorised), the automatic mode is not functional. In this case, the selector
switch must be used as a switch, the auto mode becomes the OFF function.
WARNING
The following indications:
1. Before use, read the instructions
2. Connect the hoover's metal ground clamp to a part of the workplace connected to the installation's ground circuit.
(The suction and circulation of dust generates static electricity).
3. Disconnect the pneumatic power supply before changing the bag.
The dust bag should avoid contact with flames or sparks.
FEATURES OF THE HOOVER
Mobile pneumatic hoover for explosive dusts deriving from sanding or similar operations, designed for connection to a
pneumatic tool.
Depression
Air flow
Air consumption
Adjustable inlet pressure
Suction cable length
Suction cable diameter
Dust bag capacity (included)
Dimensions
Weight
FITTING THE DUST BAG (058880)
WARNING: during this operation, explosive atmospheres and dust deposits may be formed; avoid
introducing potential sources of ignition such as: mechanical sparks, electrical parts, hot surfaces,
flames, hot gases, electrostatic charges in the vicinity of the device. Follow the internal standards
for behaviour in the presence of potentially explosive atmospheres according to the Atex Directive
2014/34/EU.
Translation of the original
instructions
An adaptable nozzle is supplied with the hoover.
Features
GYSDUST SELF EXTRACTOR
1 150 mm H2O
600 l/min
340 l/min
5 bar max
5 m
Ø 29 mm
7 kg
350 x 800 x 400 mm
21 kg
ATEX Standard
Group II
Category 3
13