g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specifi ed in the instructions.
Charging improperly or at temperatures outside
the specifi ed range may damage the battery and
increase the risk of fi re.
6) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SAFETY INSTRUCTIONS FOR CORDLESS
CAULKING GUN
• Do not continue to press the On/Off switch
after the caulking gun has been automatically
switched off. This can damage the battery.
• When working with the cordless caulking gun,
use personal protective equipment recommend-
ed by the manufacturer of the consumable. You
can fi nd information about this in the safety
data sheet for the consumable.
• Always wear safety goggles and gloves that
are suitable for handling chemical substances.
Depending on the material, further protective
measures may be necessary.
• This power tool may only be used to dispense
sealants and adhesives from standard cartridg-
es. Dispensing other types of materials or using
customer-specifi c packaging systems is strictly
prohibited.
• When working with volatile or hazardous sub-
stances, ensure that the workplace is suffi -
ciently ventilated and that suitable breathing
apparatus is worn if necessary.
• Ensure that the cartridges are the right size for
this power tool. Ensure that the cartridges fi t
well in the cartridge holder and that this holder
is securely attached to the power tool. Only then
should you begin to dispense material.
• Never try to dispense material from an incor-
rectly aligned or blocked cartridge.
• Never point the power tool at yourself or anyone
else during use.
• In case of damage and improper use of the
battery, vapours may be emitted. The battery
can set alight or explode. Ensure the area is
WWW.VONROC.COM
well ventilated and seek medical attention
should you experience any adverse effects. The
vapours may irritate the respiratory system.
• Do not open the battery. There is a risk of
short-circuiting.
• The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit may occur,
causing the battery to burn, smoke, explode or
overheat.
2. MACHINE INFORMATION
Intended use
The caulking gun is suitable for applying sealants
and adhesive compounds of various viscosities to
dry surfaces that are free from dust and grease
or for fi lling joints with the material used. The
caulking gun can also be used outdoors in areas
protected against splashing water.
TECHNICAL SPECIFICATIONS
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifi cations table for the correct
composition and contents of your set.
Batteries
Model No.
included
CG501DC
-
S_ CG501DC
CD801AA
S2_ CG501DC
2 x CD801AA
S3_ CG501DC
CD803AA
Machine information
Voltage
Cartridge size
Feed rate
Extrusion force
Sound pressure level L
PA
Sound power level L
WA
Vibration a
h
Weight
Chargers
included
-
CD802AA
CD802AA
CD802AA
20V
310ml
1-4mm/s
1.18kN
61.8dB(A)
69.8dB(A), K=5dB(A)
<2.5m/s², K=1.5m/ s²
1.4kg
5
EN