Publicidad
Idiomas disponibles
Idiomas disponibles
PRODUCT OPERATION
Using the SimpleSpa Eco (Cont'd)
Risk of scalding. High water temperature can cause severe burns.
Be sure to set the water temperature for your hot water heater at or below 120°F (49°C)
and use extreme caution when mixing hot and cold water during use.
Brondell is not liable for any misuse of product or failure
To adjust tempurature (SSE-25 dual
tempurature model only)
• To increase water temperature, slowly
turn the temperature to the right until the
desired temperature is reached.
• To decrease water temperature, turn the
temperature to the left until the desired
temperature is reached.
NOTES:
There may be a delay in the warm water
reaching the bidet attachment as the
cold water in your pipes clears and is
replaced with hot water (similar to the
delay when you turn your faucet on).
If only connected to cold water, make
sure that the temperature dial on the
bidet is turned as far to the left as
possible for best pressure adjustability.
TIP: For a quick and easy way to get
warm water to the bidet, run the "nozzle
cleaning" function with the warm water
turned on for a short time until the
water heats up, then use as normal.
WARNING
to use caution when connecting to hot water.
13
Publicidad
