Haier HCR3818ENMM Guia Del Usuario página 15

Control panel
Before first use
▶
Remove all packaging materials, keep them out of children`s reach and dispose
them in an environmentally friendly manner.
▶
Clean the inside and outside of the appliance with water and a mild detergent before
putting any food in it.
▶
After the appliance has been levelled and cleaned, wait for at least 2-5 hours before
connecting it to the power supply. See Section INSTALLATION.
▶
Precool the compartments at high settings before loading with food. The function
Power- Freeze helps to cool down the compartments quickly.
▶
The refrigerator temperature and freezer temperature are automatically set to 5° C
and -18° C respectively. These are the recommended settings. If desired, you can
change these temperatures manually. Please see ADJUST THE TEMPERATURE.
Sensor keys
The buttons on the control panel are sensor keys, which already respond when lightly
touched with the finger.
Switch on /of the appliance
The appliance is in operation as soon as it is connected to the power supply.
When the refrigerator is first powered on, the indicator "a" and "b" (Temperature display)
illuminates. The fridge temperature and freezer temperature are automatically set to 5° C
and -18° C respectively.
Maybe the panel lock is active.
Notice
When the appliance is switched on after disconnection from the main power supply, it
may take up to 12 hours for the correct temperatures to be reached.
Empty the appliance before switching off. To switch off the appliance,pull the power cord
out off the power socket.
Standby-mode
The display screen turns off automatically 30 seconds after pressing a key.The display will
be automatically locked.It lights up automatically by touching any key or opening the
door.
Lock/unlock panel
▶ Automatic lock: When the fridge door and freezer door are closed and there is no key
operation within 30 seconds, the display screen will be automatically extinguished
and locked.
▶ Manual lock: When the display screen is unlocked, press the button "D" (Panel lock
selector) and hold for 3 seconds, the buzzer rings once, the indicator "d" (Panel lock)
illuminates, and the display is locked.
12
GB