Pleasant Hearth PHZCI28LP Manual De Instrucciones página 17

INSTALLATION
4. Reinsert fan and bracket assembly into the Top Vent
and screw in x 4 screws into the back of the fireplace
cabinet.
5. Route the fan cable through the race way.
Note: Junction box needs an outlet installed.
GREEN/VERDE
BLOWER
BLACK/NEGRO
SOPLADOR
WHITE/BLANCO
IF ANY ORIGINAL WIRING SUPPLIED
WITH THIS HEATER MUST BE
REPLACED, IT MUST BE TYP AWG
105C WIRE OR ITS EQUIVALENT
EXCEPT AS INDICATED.
6. Reassemble top grill (if frame is not already
removed).
BLOWER WIRING DIAGRAM
SI VOUS DEVEZZ FAIRE REMPLACER
LES FILS D'ORIGINE DU RADIATEUR,
PROCUREZ-VOUS DU FIL AWG 105C
OU L'EQUIVELENT SAUF INDICATION
CONTRAIRE.
4
Screws
5
Install a NEMA 5-15R
receptacle for power supply
6
SECTION XSEC0004-XSEC0004
17
Screws