Publicidad
Idiomas disponibles
Idiomas disponibles
Caution
Hands may be crushed, seized or otherwide injured.
Keep your hands away from areas which are marked with this symbol.
Pneumatic tool
Disconnect machine from the air supply (close shut-off valve and vent the air hose.
Unless otherwise specified, our „General Sales Terms" apply.
Warranty and liability claims in regards to persons or equipment damages are invalid, if one or
several of the following causes apply:
- Use of the equipment in a non-designated application.
- Improper assembly, start- up, operation or maintenance of the machine.
- Operation of the machine with defect safety devices or improperly fixed or non-functioning
safety and protection devices.
- Non-observance of the instructions in the operating instruction booklet concerning transport,
storage, assembly. Start-up, operation, maintenance and setting up of the machine.
- Independent structural alterations or settings on the machine beyond the intended purpose
- Inadequate supervision of wear parts.
- Improperly carried out repairs, inspections or maintenance.
- Catastrophic cases because of a war, acts of god or other reasons which are beyond our
control.
Generally, the machine operator is responsible for correct conditions/ operation of the machine
and adherence to the safety regulations.
The machine is built according to the level of technology and recognized technical safety
regulations. However there is still a risk of accidents to the operator or third parties or damage to the
machine or other objects.
All current regulations and specifications which apply to the site of operation in regards to
accident prevention, installation of electrical and mechanical systems as well as radio interference
must be observed.
The operator must make sure that...
- the function of the safety equipment is regularly checked.
- the safety symbols and safety notes on the machine/device and the operating instruction
booklet are observed.
- the safety instructions and the operating instruction booklet are available completely and in
legible condition on site with the machine.
The operator is obliged to only allow personnel to work on the machine who...
-
are familiar with the basic work environment safety rules and accident preventing regulations.
Also, those persons must have been instructed in the correct use of the machine.
-
have read and understood the safety and warning notes in the operating instruction booklet
as well as all other documentation pertaining to the machine.
-
have been tested at regular intervals in regards to their safety-conscious operation of the
machine.
36
WARRANTY AND LIABILITY
OWNER OBLIGATIONS
Publicidad
