WF 0247
INDICATIONS
- This fan can be tilted up and down by manually moving the head to the desired position.
- Select the desired function using the buttons on the remote control or the front panel of the fan.
- All fan functions can be selected from both the front panel and the remote control.
- To start the fan, use the ON/OFF button and press the SPEED button to select the desired operating
speed (slow, medium, high).
- To select the fan swing mode, once turned on, press the SWING button.
- The fan has a shutdown timer from 0.5h to 7.5h using the TIMER button. Each time the button is pressed,
the timer advances in half-hour increments.
- To choose the mode, press the MODE button. It can vary between normal, natural or sleep mode. Natural
and Sleep modes vary the fan speed automatically to create a pleasant breeze.
- To turn off the fan, press the ON/OFF button again.
- The remote control uses two AAA batteries.
SOLUTION TO SIMPLE FAILURE.
- Always check if the plug is properly inserted in the socket.
- Always check if the propeller is touching any other part such as the protective grills (1, 6).
- If the fan produces noise or vibrations, check the following:
• Whether the propeller has been properly mounted on the shaft (6) of the motor.
• The rear grill (6) is firmly attached to the motor.
• The protective grill has become loose and rubs against the rotating propeller.lways check whether the
power plug has been inserted properly into the socket
CARE, CLEANING & STORAGE
The fan blade and grill set should be cleaned regularly for most efficient operation. Unplug the fan, then
reserve the assembly procedure to remove those parts from the motor assembly before cleaning. Wipe
with a damp cloth then towel dry.
Never immerse any fan components in water. Wipe the fan only with a dry or slightly moist cloth, then
immediately towel dry.
Always sotre the fan in a cool dry location.
10