Sony SDM-S205 Manual De Instrucciones página 30

Checking the model name of the
display
Check the model name of the display first.
The model name is located at the rear of the display (Example:
SDM-S205F).
You cannot use some of the functions or menu options for
certain display models.
Identifying parts and controls
See the pages in parentheses for further details.
The illustration only shows one of all the models that are available
for this display.
Front of the display
7
Downloaded from: https://www.usersmanualguide.com/
The contents with
depending on the models. For details, see "Specifications"
(page 23).
1 1 (Power) switch and 1 (power) indicator
(pages 10, 17)
This switch turns the display on when 1 (power) indicator is
red. To turn the display off, press this switch again.
If the 1 (power) indicator fails to light, press the MAIN
POWER switch (8).
2 MENU button (page 13)
This button turns the menu screen on and off.
3 m/M buttons (page 13)
These buttons are used to select the menu items and make
adjustments.
4 OK button (page 13)
This button activates the selected menu item and adjustments
made using the m/M buttons (3).
INPUT (page 12)
These buttons switch the video input signal between INPUT1
and INPUT2 when two computers are connected to the
display. (Only available when menu is turned off.)
MENU
5 ECO button (page 17)
This button is used to reduce the power consumption.
When the menu screen is not displayed, you can also
automatically adjust the picture quality for the current input
signal while keeping pressing this button for more than 3
seconds (One touch Auto adjust). (analog RGB signal only)
6 Light sensor (page 18)
This sensor measures the brightness of the area surrounding
the display. Be sure not to cover the sensor with paper, etc.
INPUT
7 Audio output jack (page 9)
OK
This jack outputs audio signals to speakers or other audio
equipment.
ECO
5
mark for specifications vary
GB