Heiniger SIRIUS Manual De Instrucciones página 33

6.2 Activities during operation
6.2.1 Changing the battery
When the battery is discharged, the hair clipper is switched off by a protective circuit.
1 2
Fig. 20
1 2
Fig. 21
6.2.2 Changing the clipper head
Fig. 22
Fig. 23
6. Fold the required clipper head on the blade hinge and fold it onto the clipper when
switched on by applying light pressure (Fig. 17, to Fig. 19).
NOTE!
Only work with sharp clipping blades, replace blunt or defective blades without teeth.
The correct resharpening of clipping blades is only to be done by special machines or
by a specialist. In that case, contact your service centre.
Translation of the original instructions / Hair clippers
1. Move the switch to position "0" (Fig. 4).
2. Push the interlock battery (2) on both sides inward
and pull the battery (1) out of the clipper.
3. Insert the charged battery (1) into the clipper (2), until
the interlock battery is engaged on both sides.
1. Move the switch to position "0" (Fig. 4).
2. Push the interlock clipper head.
3. Fold the clipper head forwards when the interlock
clipper head is pressed.
4. Take off the clipper head.
5. Clean the opened hinge by the help of the provided
brush.
15