Proxxon IBS/A Manual Del Usuario página 16

h) Use extra caution when making a "pocket cut"
into existing walls or other blind areas. The protru-
ding wheel may cut gas or water pipes, electrical
wiring or objects that can cause kickback.
Safety warnings specifi c for wire brushing
operations:
a) Be aware that wire bristles are thrown by the
brush even during ordinary operation. Do not over-
stress the wires by applying excessive load to the
brush. The wire bristles can easily penetrate light
clothing and/or skin.
b) Allow brushes to run at operating speed for at
least one minute before using them. During this
time no one is to stand in front or in line with the
brush. Loose bristles or wires will be discharged
during the run-in time.
c) Direct the discharge of the spinning wire brush
away from you. Small particles and tiny wire frag-
ments may be discharged at high velocity during
the use of these brushes and may become imbed-
ded in your skin.
Only for use in dry rooms
Charger LG/A
Protection class II device
WARNING
Always wear protective goggles
Do not dispose of the device charger and
battery with household rubbish!
Description of the machine
The PROXXON IBS/A industrial drill/grinder is the
ideal device for micro drilling, milling, grinding,
polishing, brushing, removing rust, engraving,
chasing and separating. You can work on any
type of material such as steel, non-ferrous me-
tals, glass, wood, minerals and ceramics: You will
fi nd the matching tool for any task in our com-
prehensive range of accessories. 34 bits and
cutters (with 2.35 mm shaft) are included in the
- 16 -
All manuals and user guides at all-guides.com
scope of delivery.
The precision drill spindle is supported free from
play through two precision ball bearings in the
aluminium die-cast head: This guarantees a long
service life and accurate concentricity.
A quiet, permanently excited special motor with
electronic speed control ensures maximum per-
formance at minimum size, the speed range of
7,000 to 23,000 revolutions per minute permits
great fl exibility while working. The compact
high-strength housing is made of glass-fi bre
reinforced polyamide.
With the 20 mm fi t at the front device end, the
device can be clamped into e.g. drill stand or
other device holders from our range.
The fl at end cap of the battery enables the tool to
stand upright as well.
The supplied steel collet chuck makes it easy to
change tools and offers a signifi cantly greater
concentric accuracy than a drill chuck.
Powerful batteries in lithium-ion technology and
2.6 Ah capacity guarantee continuous, high per-
formance work. To charge the battery, it is simply
inserted into the charger and is ready for opera-
tion again within approx. 1 hour. For your safety
the process is thermally monitored.
1 Key (Fig. 1)
1. Rotational speed regulating knob with On/Off
switch
2. Lock button
3. Sleeve nut for steel collet
4. Fit for drill stand (ø 20 mm)
5. Steel collet chucks
6. Key for chucks
7. Battery
8. Battery release button
9. Charger
2 Technical data
Device:
Length: approx. 270 mm (with battery)