Publicidad
Idiomas disponibles
Idiomas disponibles
approx. 235 mm (without battery)
Weight:
approx. 700 g (with battery)
approx. 520 g (without battery)
Fit:
Voltage:
Rotational speed:
Noise generation:
Grip vibration:
Charger:
Mains voltage:
Output voltage:
Charging current:
Battery:
Rechargeable lithium-ion battery
Nominal/charging voltage: 10.8V/12.6V
Energy/Capacity:
Please note that the sound and vibration measu-
rements in particular have been performed with
Proxxon bits and cutters. When using third-party
brands we cannot guarantee compliance with
the statements given here!
3 Scope of delivery
IBS/A (29800)
1 pc. IBS/A industrial drill/grinder
1 pc. Charger
1 pc. Battery
1 pc. Storage case
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. Key
6 pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2 mm)
1 pc. Round grinding pin Ø 5mm
1 pc. Cylinder grinding pin Ø 6mm
1 pc. Cylinder grinding pin Ø 2.5 mm
1 pc. Cup grinding pin Ø 7mm
1 pc. Tungsten carbide micro drill Ø 0.5 mm
1 pc. Tungsten carbide micro drill Ø 1 mm
1 pc. Diamond-coated grinding pin Ø 1.8 mm
1 pc. Finishing miller, ball shaped Ø 2.3 mm
2 pcs. Sanding disc Ø 22mm (pink colour) of
high-grade corundum, for steel, cast iron,
HSS steels
All manuals and user guides at all-guides.com
ø 20 mm
10.8 V
7,000 – 23,000/min
< 70 dB(A)
< 2.5 m/s2
100-240 V~, 50/60Hz
12.6 V
1 A
28.19Wh/2.61Ah
3 INR 19/66
2 pcs. Sanding disc Ø 22mm (grey) For
engraving and frosting of glass, ceramic
and stellites, also for grinding of hard
metal, white cast iron and high-alloy steels
1 pc.
Polishing disc for acrylic glass and Plexiglas
1 pc. Brass brush for machining brass, brass
alloys, copper, precious metals,
semi-precious stones, plastic and wood.
For cleaning electronic components and
printed circuit boards.
10 pcs. Corundum cutting discs for cutting
alloyed and non-alloyed steel, stainless
steels and non-ferrous metals. Can also
be used to cut wood and plastic.
1 pc.
Clamping arbour shaft diameter Ø 3.2 mm
IBS/A (29802)
1 pc. IBS/A industrial drill/grinder
1 pc. Operating instructions
1 pc. Safety guidelines
1 pc. Key
6 pcs. Collets (1.0-1.5-2.0-2.4-3.0 and 3.2 mm)
4 Commissioning and operation
Charging the battery (Fig. 2 and 3)
Caution:
Before starting up, read the warning instruc-
tions and the labels attached to the charger
and the battery!
• Do not disassemble the battery or break the
housing! Electrolytes could leak out and
cause injuries! If electrolyte gets into your
eyes, rinse them with clean water and seek
medical attention immediately!
• Protect battery from overheating! Defects
could be the result.
• Never short-circuit the battery! Strong
currents could overheat the battery. Burns
or a defect could be the possible result.
When storing the batteries, ensure that the
electric contacts cannot establish a conduc-
tive connection.
• Do not put the battery in open fi re! The bat-
tery can explode.
• Never subject the battery to liquids!
- 17 -
Publicidad
