Outsunny 845-021 Manual De Montaje E Instrucciones página 2

EN
Lawn Roller Assembly Instructions
1) Before commencing check you have all the components: roller
drum;left and right arms, centre handle grip; cross bar/scraper; axle;
fixings - See.component list below.
Do not tighten fixings until all nuts, bolts and washers are in the
correct position.
2) Assemble the left side arm to the centre handle and insert the two
bolts, and attach the flat washers, and plastic insert nuts.
3) Repeat the process for the right hand side arm.
4) Attach the right and left side arms to the drum axle.
5) Attach the cross bar/scraper to the side arms using the bolts,
washers and nuts.
6) Check the handle is square and the cross bar/scraper is not
touching the roller drum and then tighten all the fxings.
7) Turn the roller drum so that the cap is upwards and then fill with
water or for a heavier roller use sand.
Lawn Roller Application
Use the lawn roller when seeding a new lawn or after cutting to
improve the overall appearance of the lawn. Rolling will spread the
grass roots giving a thicker coverage. Rolling is advised every time
the lawn is cut.
Safety Warning
When using the lawn roller it's essential you keep your hands and
feet clear of the heavy drum. Special care is necessary when using
the lawn roller on a slope.
This product is not suitable for use by children - it is not a toy!
1