Publicidad
Idiomas disponibles
Idiomas disponibles
The term "device" or "product" in the warnings and the description of the instructions
refers to:
knife sharpener.
2.1.
a)
The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b)
Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,
or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c)
Do not touch the device with wet or damp hands.
d)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e)
When operating the product outdoors, use an extension cord designed for
outdoor use. Using an extension cord designed for outdoor use reduces the
risk of electric shock.
f)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
g)
Do not use the device if the power cord is damaged or shows signs of wear. A
damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
h)
To avoid electric shock, do not immerse the cable, plug, or the device itself in
water or other liquid. Do not use the appliance on wet surfaces.
2.2.
a)
If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
b)
Repairs to the device may only be carried out by the manufacturer's service.
Do not attempt to repair the product on your own!
c)
In the event of a fire or fire, use only powder or snow (CO2) fire extinguishers
to extinguish the live device.
d)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
Electrical safety
Safety in the workplace
Publicidad
