2.1.
Electrical safety
a)
The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b)
Do not touch the device with wet or damp hands.
c)
Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges, or moving parts. Damaged or tangled cords increase the risk
of electric shock.
d)
When operating the product outdoors, use an extension cord designed for
outdoor use. Using an extension cord designed for outdoor use reduces the
risk of electric shock.
e)
If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
f)
Do not use the appliance if the power cord is damaged or shows signs of wear.
A damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
g)
To avoid electric shock, do not immerse the cable, plug, or the appliance itself
in water or other liquid. Do not use the appliance on wet surfaces.
2.2.
Safety in the workplace
a)
Keep the work area tidy and well-lit. Disorder or poor lighting can lead to
accidents. Be foresighted, watch what you are doing, and use common sense
when using the unit.
b)
Do not use the unit in an explosive area, for example in the presence of
flammable liquids, gases, or dust.
c)
If in doubt as to whether the product is working properly or found to be
damaged, contact the manufacturer's technical service.
d)
Repairs to the device may only be carried out by the manufacturer's service.
Do not attempt to repair the product on your own!
e)
In case of open flames or fire, use only dry powder or snow (CO2) fire
extinguishers to extinguish the live equipment.
f)
No children or unauthorized persons are allowed in the work area. (Inattention
may result in loss of control of the unit.)
g)
Use the unit in a well-ventilated area.
h)
Check the condition of the safety stickers regularly. Replace them if they are
illegible.
i)
Keep these instructions for use for future reference. If the product is to be
handed over to a third party, hand it over with this user manual.
j)
Keep packaging components and small installation parts out of the reach of
children.
k)
Keep the device away from children and animals.