MSW Motor Technics MSW-DCM-04 Manual De Instrucciones página 17

3.1. Product overview
1. Lever/handle
2. Lock lever/back of the unit
3. Spiral
4. Protective gloves
5. Set of tips
6. Protective tube
3.2. Preparation for operation
POSITIONING OF THE UNIT
Place the unit on a dry and stable surface in an upright position so that it does not
move during operation. The surface needs to support the weight of the unit, it
should be flat and level. Place the unit in such a way that the main plug can be
reached at any time. The device should be placed at about 20 cm in front of the
opening of the blocked pipe. Ensure that the power supply to the unit corresponds
to that specified on the identification plate!