Publicidad
7.2.1 Refuelling
To refuel:
1.
2.
3. Refuel being careful not to
4.
5.
IMPORTANT Do not drip petrol onto
the plastic parts to avoid ruining them.
In the event of accidental leaks, rinse
immediately with water. The warranty does
not cover for damage to plastic parts of the
bodywork or the engine caused by petrol.
7.2.2 Emptying the fuel tank
NOTE Fuel is perishable and should
days. Empty the fuel tank before storing the
machine for long periods of time (chap. 9).
Allow the engine to cool
before emptying the fuel tank.
1.
surface, in the open air.
2. Place a suitable container under
3.
4.
5. Collect the fuel in a suitable container.
6.
7.
check that there are no fuel leaks from
7.3 CHECK, TOP UP, DRAINING
NOTE The type of oil to use is
given in the engine manual.
IMPORTANT The machine is delivered
to the client without engine oil.
IMPORTANT Follow all the
instructions in the engine manual.
25
.
7.3.1
Always check the oil level before use.
•
the engine to overheat. If the oil level
the correct level is achieved.
7.3.2 Draining
The oil may be very hot if removed
just after the engine has been switched
cool down for a few minutes before
•
1.
2. Place a suitable container under
3.
4. Collect the oil in a suitable vessel.
5.
6.
7.
•
1.
2.
far as possible into the hole.
3.
• Type "III":
1.
2. Place a suitable container under
3.
4.
5.
the oil into a suitable container.
EN - 16
.
Publicidad
