Product Description; Daily Use; Helpful Hints And Tips - Zanussi ZEE6140 Manual De Instrucciones

Product description

Cooking surface layout
1
145 mm
180 mm
6
Electric cooking zones control knobs
Symbol
0

Daily use

Warning! Refer to the Safety chapters.
To switch on and increase the heat setting turn
the knob counterclockwise. To decrease the
heat setting turn the knob clockwise. To switch
off turn the knob to the 0.
Power indicator is activated when either of the
zones are turned on, and will stay on until the
cooking zones are switched off.
Before first use
Put cookware containing water on each cooking
zone, set the maximum position and operate the
appliance for 10 min. This is to burn off the resi-
due in the appliance. After that, operate the ap-
pliance at minimum position for 20 min. During

Helpful hints and tips

Warning! Refer to the Safety chapters.
www.zanussi.com
2
180 mm
145 mm
5
Function
off position
Single cooking zone 1000 W
1
Single cooking zone 2000 W
2
Control Knobs
3
3
Power indicator
4
Single cooking zone 1500 W
5
Single cooking zone 1500 W
6
4
Symbol
1
6
this period, an odour and smoke can occur. This
is normal. Make sure that the airflow is suffi-
cient.
After this operation, clean the appliance with a
soft cloth soaked in warm water.
Rapid hot plate
A red dot in the middle of the plate shows a
rapid hot plate. A rapid hot plate heats up faster
than usual plates.
The red dot is painted on the surface and can
come off after some time. It does not have an
effect on the performance of the appliance.
The rapid hot plate can smoke and make an
odour when you use it for the first time. The
smoke and an odour will go off after a while.
Function
minimum heat
maximum heat
5