EN
The company thanks you for purchasing our production equipment.
It is recommended that you read the contents of this manual on the operation, installation, and
maintenance of the product.
The manual is intended to familiarize the user with the device and the principle of using the
product.
Read this manual carefully before using the product.
During the operation, carefully handle the product, do not allow mechanical damage to parts.
Keep the product clean.
1. Use of the product
HURAKAN ventilation hoods are intended for the absorption of excessive heat, damp, and
combustion products as well as for the improvement of micro-climate conditions in the
working area at the catering enterprises.
2. Delivery set
1. Passport
2. Building
3. Ventilation hood
4. A set of fixing arrangements
3.Technical characteristics.
Overall dimensions: (mm)
1.
Length
2.
Width
3.
Height
The ventilation hood resistance
provided the air consumption of
500m³/h, kg/m² does not exceed
4. The structure and the operation principle.
HURAKAN central wall-mounted ventilation hoods are the ventilation ducts. The wall-
mounted ventilation hoods are fastened to a wall. The central ones are fastened to the ceiling.
The hood is equipped with a device for the drawing (labyrinth filter) ventilation. Lining, the
filters are made of stainless steel.
The filters are enclosed without any fasteners or tools.
5. Preparing the product for work. Operation procedure
Remove the packaging, assemble the product according to the assembly diagram, install in
place, adjust for height the product is ready for operation.
6. Maintenance
Maintenance and repair of the ventilation hoods is carried out by specially trained personnel.
6
All manuals and user guides at all-guides.com
FOR BUYER'S INFORMATION:
Introduction
Name
Quantity
1
1
_
1
Value
500±2,0; 800±2,0;
900±2,0;1000±2,5; 1200±2,5;
1300±2,5;500±2,0; 800±2,0;
900±2,0;1000±2,5; 1200±2,5;
1300±2,5;
1400±3,0; 1500±3,0; 1600±3,0;
2000±3,0;1400±3,0; 1500±3,0;
1600±3,0; 2000±3,0;
700±1,5; 800±1,5
1000±2,5; 1200±2,5; 2000±3,0
400±2; 580±2
7