Publicidad
Idiomas disponibles
Idiomas disponibles
VAX04201
HDMI eARC Pass Matrix Switch 4×2
Instruction manual and technical information
Thank you for purchasing this high quality product. For optimal use and safe operation, please
read these instructions before use. Keep it as a reference for future reference. The manual is also
available as a PDF file.
Features & Intended Use:
• HDMI matrix switch to operate up to 4 HDMI sources to 2 HDMI sinks such as TV and video
projector (if you connect a soundbar, you can connect 3 HDMI sources directly).
• One HDMI input supports eARC (enhanced Audio Return Channel) and you can connect the
HDMI-eARC connector of a soundbar (backward compatible with ARC)
• EDID management
• Supports Ultra-HD up to 4K 60Hz as well as HDR10, HDR10+, HLG-HDR and Dolby Vision
Notes:
Please note that if you change the EDID settings or wiring on the switch, it may be necessary to
reboot the connected players. If you do not achieve the desired output or display, please proceed
as follows:
• Switch on the desired EDID mode on the switch and select the desired HDMI source. Switch
on the displays / television.
• Unplug the power plug of the external player for a few seconds and then plug it in again. Then
start the HDMI source.
EDID
The supported audio and video formats are negotiated between the devices. You can influence this
via the EDID control (EDID = Extended Display Identification Data, with which an HDMI sink identi-
fies itself to the HDMI source). Three modes can be selected for this purpose. The most frequently
used mode is COPY, in which display A is prioritised.
10
Publicidad
