Crosscall X-COMM Manual De Instrucciones página 20

Idiomas disponibles

with your body or hands, wash thoroughly with water. If liquid coming out of the battery

comes into contact with the product, wipe it thoroughly, avoiding direct contact with your

hands (use a pair of gloves).

There is a risk that the battery will explode if you replace it with an unsuitable model. Dispose

of used batteries according to the instructions

PRECAUTIONS FOR USE AND WATER RESISTANCE

The X-COMM is only waterproof (IP67) when the battery and the X-COMM head unit are

fully clipped together.

• To ensure your X-COMM stay dust and waterproof, always make sure to close the dust cap

and check that it is not damaged.

• Do not attempt to charge your X-COMM underwater.

• If your device has been submerged in water or the microphone is wet, the sound may

not be clear during a call. It is recommended to wait a few minutes after immersing your

device for it to return to its original audio quality. Make sure that the microphone is clean

and dry by wiping it with a dry cloth.

• If the device gets wet with salt or chlorinated water, rinse it with tap water, then dry with

a soft, clean cloth. Thoroughly wipe the dust caps.

• The device's water resistance can lead to slight vibrations under certain circumstances.

These vibrations, for example when the volume is turned up high, are entirely normal and

do not affect the performance of the device.

• Do not remove the waterproof grill and/or membrane that cover the microphone, and do

not use any tools likely to damage it (pointed, sharp, etc.).

SAFETY MEASURES

• The charger type is TPA-147A050200VU01, output voltage/current is 5Vdc/2A. The plug

considered as disconnect device of adapter.

• Do not throw your device into fire.

• Do not short-circuit.

• Do not incinerate.

•

Recycle the battery according to standards in force.

• Charge your device using the USB cable provided. Using a cable that is not compatible

could permanently damage your product.

• Using damaged cables or chargers, or charging in the presence of moisture, may cause

an electric shock.

• Ventilation should not be blocked by objects covering the vents (e.g. newspapers,

tablecloths, curtains, etc.) to prevent overheating and malfunction. Maintain a free space

of at least 10cm around your X-COMM.