Publicidad
ment collar. A reversing switch makes it possible to loosen screw or drive left-hand screw.
Note: When screw will be tightened, please set the switch to lower speed, to prevent screw head i
damaged.
5. MAINTENANCE
1 Your power tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool.
2 Never use water or chemical cleaners to clean your power tool. Wipe clean with a dry cloth.
3 Always store your power tool in a dry place.
4 Keep the motor ventilation slots clean.
5 lf you see sorne sparks flashing in the ventilation slots, this is normal and will not damage your
power tool.
6 lf the supply cord is damaged, it must be replaced by a special cord or assembly available from
the manufacturer or its service agent.
6. TROUBLESHOOTING
1 lf your screwdriver will not operate, check the power at the mains plug.
2 lf the screw head is damage frequently, check the screwdriver bit for sharpness, replace screwdri-
ver bit if worn.
3 lf a fault can not be rectified return the screwdriver to an authorised dealer for repair.
Fig 6
Fig 7
Fig 8
5
Publicidad
