Franke FRSM 603 C TD Manual De Instalación Y Servicio página 8

30 mm
40 mm
Fig. 2
ELECTRICAL CONNECTION
Prior to carrying out the electrical connection, please ensure that:
- the plant characteristics are such as to follow what is indicated on the
data plate placed at the bottom of the working area;
- that the plant is tted with an e cient earth connection, following
the standards and law provisions in force.
The earth connection is compulsory in terms of the law.
Should there be no cable and/or plug on the equipment, use suitable
absorption material for the working temperature as well, as indicated on
the data plate.
If connecting directly to the mains power supply, t a multi-pole switch
of a suitable size for the rated capacity with a clearance distance which
completely disconnects the power line under overvoltage category III
conditions, consistently with the rules of installation (yellow/green earth
wire must not be interrupted).
The plug or omnipolar switch must be easily reached on the installed
equipment.
Under no circumstance must the cable reach a temperature above 0 °C
of the ambient temperature.
NOTE: Make sure the characteristics of your household electrical power
supply voltage, maximum output and current are compatible with
those of your FRANKE hob.
600
55
.
MIN
150 150
. .
MIN
MIN
mm
– 8 –
THE POWER CABLE MUST ONLY BE REPLACED BY A QUALIFIED
ELECTRICIAN.
400V 3N~
2
1
L1 L2 L3
400V 2N~
2
1
L1 L2
230V~
2
1
L
Fig. 3 Considering contemporaneity factor
H05RR--F5x1.5
4
3
5
N
H05RR--F4x1.5
4
3
5
N
* H05RR--F3x2.5
4
3
5
N