Publicidad
Idiomas disponibles
Idiomas disponibles
KRS485 – Logic dialogue serial RS485 interface with building
automation and supervisory systems (Supported protocols: owner
®
protocol; RTU Modbus
).
KFTT10 – Serial FTT10 interface to connect to LonWorks
protocol supervisory systems.
KRS232 – RS485/RS232 serial converter to connect to supervisory
systems and must be associated to one or more KRS485 serial
interface modules in the case of centralised unit management.
KUSB – RS485/USB serial converter to connect to supervisory systems
and must be associated to one or more KRS485 serial interface
modules in the case of serial unit management.
KRAS – Intake anti-vibrating fitting
KRMA – Flow anti-vibrating fitting
Description and fitting instructions are supplied with each
accessory.
II.3
TRANSPORT - HANDLING AND STORAGE
DANGER!
The unit must be transported and handled by
skilled personnel trained to carry out this type of
work.
SAFEGUARD THE ENVIRONMENT!
Dispose of the packaging materials in compliance
with the national or local legislation in force in your
country. Do not leave the packaging within reach of
children.
IMPORTANT!
Be careful to prevent damage by accidental
collision.
II.3.1
PACKAGING COMPONENTS
DANGER!
Do not open or tamper with the packaging before
installation.
The units must only be moved and lifted by
specialised personnel who are trained to do so.
Bring the machine to the installation site with packaging intact using a
forklift truck or hand truck, making sure it is not off centre (position of
symbol approximate, always check stability).
The units are supplied inside a cardboard box on top of a wooden pallet
secured with 4 screws and strapped.
Each unit is supplied complete with:
User instructions
wiring diagram
list of authorised service centres
warranty document
safety valve certificates
safety valve, fan and pump or circulator use and maintenance
manuals.
II.4
®
compatible
G
G
(*) Weight of packaged unit with storage empty.
25
SECTION II : INSTALLATION AND MAINTENANCE
HANDLING GUIDELINES
DANGER!
An off-centred barycentre could cause sudden and
hazardous movements. Movement of the unit must
be performed with care, in order to avoid damage to
the external structure and to the internal
mechanical and electrical components.
Also make sure that there are no obstacles or
people along the route, in order to prevent the risk
of impact, crushing or tipping the lifting device.
Y
Y
Approximate centre of gravity position.
X
MODEL
(cm)
56,5
TCCEY 114
55,0
TCCEY 117
65,0
TCCEY 121
65,0
TCCEY 126
65,0
TCCEY 128
56,5
THCEY 114
55,0
THCEY 117
65,0
THCEY 121
65,0
THCEY 126
65,0
THCEY 128
62,0
TCCEY 114 T-H
61,0
TCCEY 117 T-H
73,5
TCCEY 121 T
73,0
TCCEY 126 T
73,0
TCCEY 128 T
57,0
THCEY 114 T-H
62,0
THCEY 117 T-H
73,0
THCEY 121 T
72,5
THCEY 126 T
72,5
THCEY 128 T
X
G
X
G
Fig.5
Y
Weight (*)
(cm)
kg
28,0
260
26,5
280
31,2
350
31,0
370
31,0
370
28,0
280
26,5
290
34,2
370
34,0
380
34,0
380
25,6
350
27,1
370
32,0
440
32,2
470
32,2
470
27,1
360
26,6
380
34,0
450
34,2
480
34,2
480
Publicidad
