Safety Instructions; Product Description - Fracarro HEAD LINE SIG7900 Instrucciones De Uso

The unit should be installed by authorised and qualifi ed personnel.
Do not open the module cover as there are high voltage parts. Only use the original power cable
supplied.
SELECTING PRODUCT LOCATION:
Install the product in a dry location leaving space around the product housing to allow ventilation.
Do not place the equipment above or near radiators, hobs, etc. where it may be exposed to heat
or oily vapours.
Excessive temperature and/or heat build-up will adversely affect the life of the product and could
cause a hazard.
Moisture may damage the product. If condensation is present, ensure the product is dry before
installation. Acclimatise the product in the installation location for two hours before connecting to
the mains.
CAUTION! The unit should only be opened by authorised personnel. Any repairs or attempts
to repair this equipment will invalidate the guarantee. Remove the mains plug before carrying
out any maintenance work on the product.
SAFETY:
This product is categorised as Class II, in accordance with EN60065 and should be connected
to the power supply using the cable supplied. Never connect the mains cable to the PME of the
mains network. The installation must comply with local safety regulations.
EARTHING:
This product must be connected to the distribution system earth in accordance with EN50083-1
part 10. Do not connect the product to the protected earth of the power supply.
The HEADLINE rack is mounted using a 19" rack cabinet. Take the rack out of the box and mount
it to the cabinet using the screws provided.
Included in the box:
• 19" rack with interconnection module
• 220V mains cable
• sticky labels to identify the modules
• handles to take the modules out
The interconnection module allows power to be distributed to all modules and enables the modules
in the same row to be programmed.
The mains power and data BUS is distributed through a panel mounted in the back of the HEADLINE
rack. Each module of the HEADLINE range has its own power supply so no need to foresee the
redundancy of power supplies in order to guarantee the headend operation.
A HEADLINE system consists of one or more module rows with its own interconnection module.
Each row can have up to 11 modules plus an interconnection module. A Headline system can
have up to 15 rows.

SAFETY INSTRUCTIONS

PRODUCT DESCRIPTION

STRUCTURE OF A HEADLINE SYSTEM
12