Ninja Smart Screen CT670V Serie Manual Del Propietário página 8

VACUUM BLENDING WITH
THE FRESHVAC™ PITCHER
IMPORTANT: Review all warnings on
pages 4–7 before proceeding.
IMPORTANT: As a safety feature, if the
pitcher and lid are not properly installed,
the timer will display " " and the
motor will be disabled. If this happens,
repeat step 4. When the pitcher and
lid are properly installed, the program
buttons will illuminate steadily, indicating
the appliance is ready for use.
Vacuum blending recommended
for smoothies, soups, dips, frappes and
protein drinks for brighter flavors, vibrant
colors, and improved textures.
Non vacuum blending recommended
for frozen drinks and ice cream programs
for best results.
1 Place the unplugged motor base on
a clean, dry, level surface such as a
countertop or table. Press downward on
the motor base to adhere the suction
cups to the work surface. Plug the motor
base into a wall outlet.
2 Set the pitcher on a level surface and
add ingredients, making sure not to
exceed the MAX LIQUID line. Place the
stacked blade assembly on the spindle
in the pitcher.
14
3 Add ingredients, making sure to not
exceed the MAX LIQUID line marked on
the side of the pitcher.
IMPORTANT: Overfilling the pitcher
may cause harm to the FreshVac Pump
when in use.
4 Place the lid on the pitcher, aligning the
triangle symbol located on the lid with the
triangle symbol located on the pitcher's
handle. Press down on the handle until
it clicks into place. The triangle symbols
MUST be aligned for the lid to lock onto
place and the unit to operate.
5 Set the pitcher on a level surface and
place the FreshVac Pump on top of
the FreshVac Tab on the lid. The pump
DOES NOT lock into place on the lid.
IMPORTANT: Make sure the FreshVac
Tab is dry before using FreshVac Pump.
6 Press the power button on top of the
pump to begin vacuum sealing. The
pump will make a motorized noise and
the light on the pump will illuminate
in white while vacuum sealing is in
progress. You do not need to hold the
pump in place while vacuum sealing.
IMPORTANT: Overfilling the cup may
cause harm to the FreshVac Pump
when in use.
7 When vacuum sealing is complete, the
pump will shut off automatically and the
green light on the pump will illuminate.
8 To release the pump from the pitcher,
press the pump release button on the
bottom front of the pump and lift.
9 To blend ingredients, follow
instructions on the next page. When
blending is complete, pressure must
be released from the pitcher through
the FreshVac™ Tab before opening the
lid. See page 20 for more information.
TIPS:
• If the stacked blade assembly is not fully
seated, you will not be able to install and
lock the lid.
• To learn more about the programs that
work with your FreshVac Pitcher, refer to
page 11.
10 Lower the FreshVac pitcher onto the
motor base. Align the pitcher so the
handle is to the right, in a diamond
position. Then rotate the pitcher
clockwise until it clicks into place.
NOTE: The Smart Screen™ Motor
Base can detect which container is
on the motor base. Only the functions
available for a particular container will
illuminate on the touchscreen.
ninjakitchen.com 15