Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Service
WARNING
maintenance .
WARNING
cause a serious hazard . We recommend that all tool service be performed by a SKIL Factory
Service Center or Authorized SKIL Service Station.
General Maintenance
WARNING
Periodically inspect the entire product for damaged, missing, or loose parts such as screws,
nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product
until all missing or damaged parts are replaced. Please contact customer service or an
authorized service center for assistance.
Cleaning
WARNING
air . Ventilation openings and switch must be kept clean and free of foreign matter. Do not
attempt to clean by inserting pointed objected through openings.
WARNING
ammonia and household detergents that contain ammonia.
Lubrication
All of the bearings in this tool are lubricated with an amount of high grade lubricant sufficient
for the life of the unit under normal operating conditions. Therefore, no further lubrication is
required.
20
To avoid serious personal injury, always turn power switch "OFF"
and remove plug from the power source outlet before performing any
Preventive maintenance performed by unauthorized personnel may
result in misplacing of internal wires and components which could
When servicing, use only identical replacement parts . Use of any
other parts could create a hazard or cause product damage .
The tool may be cleaned most effectively with compressed dry air .
Always wear safety goggles when cleaning tools with compressed
Certain cleaning agents and solvents damage plastic parts . Some of
these are: gasoline, carbon tetrachloride, chlorinated cleaning solvents,
Publicidad
