Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION OF THE TOOL
TOOL SPECIFICATIONS
Model
Input voltage:
Power:
No load speed:
GENERAL WARNINGS & DISPOSAL
To reduce the risk of injury,
the user must read
the instruction manual.
This symbol is used throughout this manual
to warn the user about potential risks. Please
read & understand these sections before using
the device.
Personal protective equipment (PPE), such as ear defenders,
eye protection, safety gloves and a dust mask be worn during
the operation of the device.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING
Read all safety warnings, instructions
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains
operated (corded) power tool or battery operated (cordless)
power tool.
1. Work area safety
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks, which may ignite
the dust or fumes.
• Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
2. Electrical safety
• Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of electric shock.
KN OS-125
120 V ~ 60 Hz
320 W
6,000 - 14,000 r/min
Model
Sanding disc diameter:
Weight:
Protection class:
The device must not be exposed
to rain or immersed in water.
Do not allow any part of the device to come
into contact with flames, or to catch fire.
This product has been marked with symbol
relating to removing electric and electronic
waste. The product should not be discarded
with household waste but must be returned
to a collection system. It will then be
recycled or dismantled in order to reduce
the impact on the environment. Electric and
electronic equipment can be hazardous for
the environment and for human health since
they contain hazardous substances.
• Avoid body contact with earthed or grounded
surfaces, such as pipes radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
the cord away from heat, oil, Sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock
• If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
3. Personal safety
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious
personal injury.
KN OS-125
125 mm
1.7 kg
/II
Publicidad
