Tabla De Contenido - WALTHER PILOT PILOT WA 900 Manual De Instrucciones

Contents
Exploded Drawing
Declaration of CE-Conformity
List of Replacement Parts
1 General
1.1 Identification of Model Version
1.2 Normal Use
1.3 Improper Use
2 Technical Description
3 Safety Warnings
3.1 Safety Warting Symbols
3.2 Generally Applicable Safety Precautions
4 Assembly / Installation
4.1 Radial or circulation method
4.2 Mounting of Spray Gun
4.3 Connection of Input Lines
5 Operational Handling
5.1 Safety Warnings
5.2 Starting/Stopping Requirements
5.3 Spray Pattern Test
5.4 Spray Pattern Adjustments
5.5 Retooling of Spray Gun
5.6 Conversion of adapter plate from radial to circulation method
6 Cleaning
6.1 Safety Warnings
6.2 Cleaning - Complete
6.3 Cleaning - Routine
7 Repairs / Replacements
7.1 Replacement of defective Needle Seal Packings
7.2 Replacement of Nozzles, Needles, Springs and Seals
8 Trouble shooting and Corrective Action
9 Disposal of Cleaning / Servicing Substances
10 Specification Data
2
29
30
36
36
36
37
37
38
38
39
39
39
40
40
41
41
41
41
42
43
44
44
44
44
46
46
46
47
48
48
49
28
Declaration of CE-Conformity
We, the manufacturers of the equipment, hereby declare under our sole respon-
sibility that the product(s) described below conform to the essential safety requirements.
This declaration will be rendered invalid if any changes are made to the equipment wit-
hout prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Automatic Spray Guns PILOT WA 900-Models
WA 900
WA 905
WA 920-HVLP
WA 925-HVLP
WA 940-HVLP PLUS
WA 945-HVLP PLUS
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006 / 42 / EC
94 / 9 EC (ATEX Directives)
DIN EN ISO 12100-1
DIN EN ISO 12100-2
EN 1127-1
Specification according 94 / 9 / EC
Category 2 Part marking
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the pro-
vision of the Directives 2006 / 42 / EC.
Wuppertal, 04 February 2013
i.V.
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
(Standard with internal control)
(Standard without internal control)
(Low pressure with internal control)
(Low pressure without internal control)
(Mediem pressure with internal control)
(Mediem pressure without internal control) V 21 945
DIN EN 1953
DIN EN 13463-1
Tech.File,Ref.:
II 2 G c T 5
2416
29
V 21 900
V 21 905
V 21 920
V 21 925
V 21 940