HON END BOOK SHELF Instrucciones De Montaje página 5

Illustration 10
Minifix
bolt
Minifix
bolt
Illustration 11A
Bottom
Illustration 11B
Bottom
Shelf
assembly
2420956500_E
www.hon.com
END BOOK SHELF
Shoulder
Bottom
Minifix
bolt
Shelf
assembly
RH
Minifix
bolt
LH
10. Refer to Illustration 10. Use a rubber mallet to install
five dowels (from hardware pack) onto bottom of
assembly as shown.
Use the Phillips screwdriver to install seven minifix
bolts (from hardware pack) onto bottom assembly as
shown. Tighten each minifix bolt until bolt shoulder is
flush against surface of bottom panel.
11. Refer to Illustration 11A for right handed units and 11B
for left handed units. Attach bottom to end panel/shelf
assembly by inserting minifix bolts, attached to bottom,
into holes drilled into bottom of end panel/shelf assem-
bly.
5 OF 7