Ashley Signature Design 2160412 Manual Del Usuario página 4

4. INSTALL-FLOOR GLIDES BEFORE USE
Your li� chair has four adjust able floor glides. They are located in the owner's package and must be installed before
use. These glides can be adjusted to level your li� chair. See
WARNING : Failing to install these floor guides may result in damage to your li� chair, flooring, and may cause the
chair to become unstable and fall over causing personal injury or death.
Figure B
5. To install the back, align the female brackets in the back with the male brackets in the chair base, slide the back down
Figure C
on the base. See
each side of the chair to ensure the back is locked in properly.
Figure C
6. If your model has back wings, align the male the female brackets and slide the wing down into place, See FigureD.
Please Note there is a label on the brackets. Please assemble them as 1-1 and 2-2.
Figure D
1
7. Connect the Power Transformer cable to the corresponding plug coming from the back of the chair. Figure A #4
8. Connect the Power Cord into the Power Transformer. Figure A #5
9. Connect the Power Cord into an electrical outlet near where the chair will be used. Figure A #6
SIGNATURE DESIGN BY ASHLEY
Push down on the top of the back to lock the back into posi�on. You will hear a click from
All Rights Reserved.
Figure B.
Snap
Aug. 2022
00172D Page 4 Of 26