Publicidad
Idiomas disponibles
Idiomas disponibles
Radio
Radio
(for DMX7709S)
(for DMX7709S)
Listening to the radio
This unit alarms you emergency when receiving an
alarm signal from FM broadcast.
Select [Radio] as the source.
From the Home screen (page 4), touch as follows:
The last station you selected is tuned in, and the
source control screen for the station is displayed.
Playback information on the source control
screen
Radio
1 Selects the band (AM/FM1/FM2/FM3)
• Each time you touch [FM], FM band changes in
order of FM1, FM2, and FM3.
20
ENGLISH
2 Station information area
• Touching [<] scrolls the text if not all of the text
is shown.
• Touching [Radio Text] switches between [Radio
Text], [Radio Text Plus] and [PTY].
3 Current station frequency
4 Displays the preset stations window (page 21)
• To hide the window, touch [>].
5 [P1] – [P5]
• (Touch) Selects a preset station.
• (Hold) Presets the current station.
6 Displays/hides the following operation keys
[AME ]
(Hold) Preset the stations
automatically.
[MONO]
(For FM stations) Activates monaural
mode for better FM reception (stereo
effect will be lost). The MONO indicator
lights up.
• To deactivate, touch [MONO] again.
[TI]
(For FM RBDS stations)
Activates TI standby reception mode.
• When TI is activated, the unit is ready
to switch to Traffic Information if
available. The TI indicator lights up
in white.
• If the TI indicator lights up in orange,
tune in to another station providing
Radio Broadcast Data System signals.
• The volume adjustment made for
Traffic Information is automatically
memorized and used.
• To deactivate, touch [TI] again.
7 TI indicator
8 ST/MONO indicator
The ST indicator lights up when receiving an FM
stereo broadcast with sufficient signal strength.
9 Seek mode indicator
p Operation keys
Displays the <Equalizer> screen
[
]
(page 25).
[PTY]
(For FM RBDS stations)
Enters PTY search mode.
1 Touch [PTY].
2 Touch and hold a PTY code to
search for.
If there is a station broadcasting a
program of the same PTY code as
you have selected, that station is
tuned in.
[SEEK]
Selects the seek mode for [
[
T
].
• AUTO1 (Initial): Auto search
• AUTO2: Tunes in preset stations
one after another
• MANU: Manual search
[
S
]/[
T
] Searches for a station.
• The search method differs
according to the selected setting
for [SEEK] (see above).
S
]/
Publicidad
