Publicidad
Idiomas disponibles
Idiomas disponibles
Maximum screw-in length
For mounting in threaded blocks the maximum screw-in length has to be taken into consideration (according
to DIN 13). Depending on that the length of the threaded block for screwing in proximity sensors should
not exceed the following dimensions. In the case of larger threaded blocks we recommend drilling a blind
hole in order to adhere to the maximum screw-in length.
Thread
max. screw-in length
M 12 x 1
M 18 x 1
Installation of cables
Wiring of the MRS should be routed separately or screened from heavy conductor lines, as in extreme
cases inductive peak voltages can destroy the sensors despite the integrated protective circuit. Screened
cable or twisted lines are recommended, especially for longer cable runs > 5 m. Direct control of electric
light bulbs is to be avoided, because during the switch-on moment cold current is many times the rated
current and can destroy the output stage of the sensor.
Units with strong local field power, e. g. high power walkie-talkies, or noise sources in the lower fre-
quency range, e.g. long, middle or short wave transmitters should not be operated close to the sensors
or additional measures have to be taken in order to eliminate false switching.
Pin connection for pluggable sensors
Pin connection for pluggable sensors (top view)
3
4
1
2
12
8 mm
12 mm
Connector -Y5
1
4
Connector -Y7
3
Publicidad
