Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Step 1: Remove the Existing Switch
WARNING
Risk of electric shock!
Make sure the power to every switch has been turned off before installation.
1.
Turn off the power at circuit breaker or fuse box.
2.
Use an electrical tester to test the power is off before installation.
3. Unscrew the existing switch and pull it out from the wall to reveal the wires.
Step 2: Identify the Wires
1.
Identity the specific wires with some labels.
2.
Disconnect all of the wires from the existing switch.
Important Note: A neutral wire is required to install the smart switch.
Step 3: Install the New Smart Switch
1.
Use a screwdriver to separate the main unit (receptacle) and the faceplate.
2.
According to the following wiring diagram, connect the wires to
corresponding wire ports.
5
Publicidad
