Trixie TX6 Instrucciones página 5

settings for the meals with the arrow buttons.
• If you want to change the time, keep ENTER pressed for 3
seconds. MEALS flashes and you are in setting mode. Now
press the downward arrow. When the time flashes, press
ENTER again. Now you can set the time with the arrow
buttons.
Resetting:
Do the folllowing to reset the device to default mode:
Turn the device off and press both arrow buttons simulta-
neously. Then press ON/OFF briefly to turn the device on.
Only let go of the arrow buttons when the display lights
up. Now continue with the part "Turning the device on" to
programme the device anew.
Changing the batteries:
When battery power is low, the red LED light flashes
slowly (once per second). Then the batteries have to
be changed. When you are away for a longer time, you
should change the batteries before you leave. Important:
after changing the batteries, you have to turn the device
on again and set the time anew. The meals you have pro-
grammed are saved in the device, however.
Cleaning:
The feed bowls are dishwasher safe. The top can be wiped
with a soft cloth and a mild cleaning agent. It must not be
submerged in water, as this could lead to short circuit or
electric shock and damage electronic components. Leave
all parts to dry well before you fill in new food (but not
exposed to sunshine).
Trouble shooting:
• If the display does not light up, turn the device on again.
(See corresponding section in these instructions)
• If the time flashes, there was a power failure and the time
has to be set anew (see corresponding section in these
instructions). The programmed meal times do not have to
be set again.
• If the red LED light flashes:
• Fast flashing (3 times per second) means error. You should
check the device, possibly food has blocked a chamber.
• Slow flashing (once per second) indicates low battery
power. Change the batteries, turn the device on and set
the time anew.
• Very slow flashing (once every 5 seconds) means that
all 6 chambers have been served and new food has to be
filled in. After refilling the chambers, press START. Then
the device will work according to the programming.
Warning
• Remove all packaging before you use the device, dispose of
all packing material properly. Some items may be packed
in poly bags. Danger of suffocation, keep out of reach of
children and pets.
Automatic Food Dispenser TX6
• Read the instruction carefully before operating the device.
Wrong settings may lead to your pet not being fed proper-
ly or not being fed at all.
• This feeder is for indoor use only.
• Place the feeder in a dry place on even ground.
• Do not place the feeder in a closet, in a narrow space or
close to a wall, as the top section of the feeder will rotate
to expose the food chambers. Placing the feeder where
there is too little space around it may make it difficult for
your pet to access the food.
• Do not allow children to play with the feeder. Settings
may be changed or the feeder might work faultily or stop
working. Adult supervision is required when children are
near the device.
• Do not try to disassemble the feeder.
• Remove all batteries if you do not use the feeder for a
longer time.
• Do not use different types or different brands of batteries
at the same time.
5