General Description Of The Machine - Virutex PEB200 Manual De Instrucciones

5
4
3
2
1
5
4
3
2
1
13
22 - PEB200-PEB250 / Operating instructions
PEB200
8
6
7
PEB250
9
6
8
10
11 12
7
2. TECHNICAL SPECIFICATIONS

2.1 GENERAL DESCRIPTION OF THE MACHINE

This machine has been designed and manufactured to band
straight and curved panels with perpendicular sides. It can also
band sides inclined from 1º to 10º.
The most important parts are:
PEB200
1 . Adjustable intake guide for the edge
2 . Glue tank cover
3 . Fine glue thickness adjustment
4 . Panel height guide plate
5 . Guide plate adjustment lever
6 . Edge pressure adjustment
7 . Main switch
8 . Switch to start the motor
PEB250
1 . Adjustable intake guide for the edge
2 . Glue tank cover
3 . Fine glue thickness adjustment
4 . Panel height guide plate
5 . Guide plate adjustment lever
6 . Edge pressure adjustment
7 . Main switch
8 . Handle to control the speed of the motor
9 . Edge exit height adjustment
10 . LED indicator for gluing speeds
11 . Temperature adjustment sensors
12 . Temperature and function readings display
13 . Open fuse function
2.2. SPECIFICATIONS
Voltage...................................................................230V 50/60 Hz
Power rating................................................................................830 W
Motor....................................................................................................20 W
Consumption.............................................................230V 4A - 110V 8A
Heat power output.........................................450 W +180Wx2=810W
Panel height.....................................................................10 to 62 mm
Minimum internal diameter......................................................50 mm
Minimum inner radius (with auxiliary roller 5046764)........15 mm
Edge thickness options...........................................0.4 to 3 mm
Panel inclination.........................................................................max. 10 º
Feed rate (PEB200).................................................................3.6 m/min
Adjustable feeding speed (PEB250)............2-4-5 and 6 m/min
Working temperature (PEB200)..................................170°C (338ºF)
Adjustable working temperature (PEB250)..120°C-200ºC / (248-ºF)
Maximum temperature for safety cut-off...........220ºC (428ºF)
Warm up time....................................................................5-10 min
Electronic control of temperature and motor speed using a
microprocessor (only PEB250)
Glue tank capacity......................................................................230 cc
Power cable.....................................................................................5 m
120 V 60 Hz