Vissani HVO170W Manual De Instalación página 14

Installation (continued)
□
Open the microwave door and remove the two vent mounting
screws located on top of the microwave using a #1 Phillips
screwdriver.
□
Remove the charcoal filter by pushing the top of the
filter inwards, then pull it forward and out from the unit.
□
Slide the top of the new charcoal filter into the top of the filter
cavity.
□
Press the bottom of charcoal filter to place it into the correct
position.
Charcoal
Filter
□
Reinstall the vent by sliding the bottom of the vent into place.
Push the vent top into position and slide right into place. Replace the
two vent mounting screws located on top of the microwave using a
#1 Phillips screwdriver.
□
Close the microwave door. Plug in microwave oven or
reconnect power.
14