Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
(Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Remove Blower Plate
B3. Attach Mounting Plate to Wall
B4. Prepare Top Cabinet
B5. Adjust Blower
B6. Mount the Microwave Oven
NOTE: IT IS VERY IMPORTAN
READ AND FOLLOW
IN THE INSTALLAT ION
BEFORE PROCEEDI
REAR WALL TEMPLATE
This Rear Wall Template
mounting plate and to locate
outlet.
1. Use a level to check that
accurately.
2. Locate and mark at least
right side of the centerline.
It is important to use at
screw mounted firmly in
of the microwave. Mark
locations for the supplied
3. Drill holes in the marked
a stud, drill a 3/16" hole
that do not line up with a
toggle bolts.
DO NOT INSTALL THE
AT THIS TIME.
4. Remove the template
e Installation Instruction
5. Revie
w
h t
installation situation.
Darle vuelta a la hoja
versión en Español.
Locate and mark holes
mounting plate.
IMPORTAN T:
LOCATE AT LEAST ONE
THE CENTERLIN E.
MARK THE LOCATION
SPACED TOGGLE BOLTS
AREA.
Trim the rear wall template
B1. PREPARING THE REAR WALL FOR OUTSIDE
BACK EXHAUST
□
You need to cut an opening in the rear wall for outside exhaust.
NOTE
: IT IS
READ
VERY
AND FOLL
IMPO RTAN
IN THE
INST ALLA
OW THE
T TO
BEFO
DIRE CTIO
RE PRO
TION INST
NS
REAR
WAL L
CEED
ING WITH
RUC TION
This Rear
TEMP
THIS
S
Wall Templa
LATE .
3/8" TO EDGE
mounti
ng plate
te serves
outlet.
and to
locate the
to position
12"
1. Use
a level
horizon
the bottom
accura
to check
tal exhaus
t
2. Locate
tely.
that the
templa
right side
and mark
te is position
of the centerl
at least
one stud
ed
It is importa
ine.
on the
4"
screw mounte
nt to use
left or
of the microw
d firmly
at least
location
ave. Mark
in a stud
to suppor
one wood
3. Drill
s for the
supplie
two additio
t the weight
holes in
the marked
d toggle
nal, evenly
a stud,
drill a 3/16"
location
bolts.
spaced
that do
not line
hole for
s. Where
toggle
bolts.
up with
wood screws
there is
a stud,
drill 5/8"
. For holes
AT THIS
DO NOT
holes for
4. Remov
TIME.
INSTA LL
THE MOUN
e the templa
TING PLATE
5. Review
the Installa
te from
installa
tion Instruc
the rear
wall.
tion situatio
n.
tion book
for your
Darle vuelta
versió n
a la hoja
en Españ
para consu
ol.
ltar la
Loca te
and mark
moun ting
holes to
plate .
align with
IMPO RTAN
holes in
LOCA
T:
the
TE AT
THE CENT
LEAS T
ERLI NE.
ONE STUD
MAR K
ON EITH
THE LOCA
ER SIDE
SPAC
ED TOG
TION FOR
OF
AREA
GLE BOLT
2 ADDI
.
S IN THE
TION AL,
MOU NTIN
EVEN
LY
G PLAT
E
Trim the
rear wall
temp late
along
the dotte
d line.
Loca te
and mark
moun ting
IMPO RTAN
LOCA
TE AT
THE CENT
MAR K
THE LOCA
SPAC
ED TOG
AREA
.
3/8" TO EDGE
12"
T TO
THE DIRECTION S
INSTRUCTI ONS
NG WITH THIS
.
4"
serves to position the bottom
the horizontal exhaust
the template is positioned
one stud on the left or
least one wood
a stud to support the weight
two additional, evenly spaced
toggle bolts.
is
locations. Where there
for wood screws. For holes
stud, drill 5/8" holes for
MOUNTING PLATE
from the rear wall.
book for your
para consultar la
to align with holes in the
STUD ON EITHER SIDE
OF
FOR 2 ADDITIONA L,
EVENLY
IN THE MOUNTING PLATE
Locate and mark holes
l p
t a
. e
m
o
u
t n
n i
g
IMPORTAN T:
LOCATE AT LEAST ONE
THE CENTERLIN E.
MARK THE LOCATION
along the dotted line.
SPACED TOGGLE BOLTS
AREA.
Trim the
rear wall
temp late
along
the dotte
d line.
holes to
plate .
align with
holes in
T:
the
LEAS T
ONE STUD
ERLI NE.
ON EITH
ER SIDE
TION FOR
OF
2 ADDI
GLE BOLT
TION AL,
S IN THE
EVEN
MOU NTIN
LY
G PLAT
E
B. Outside Back Exhaust
along the dotted line.
Trim the rear wall template
to align with holes in the
STUD ON EITHER SIDE
OF
FOR 2 ADDITIONA L,
EVENLY
IN THE MOUNTING PLATE
□ Read the instructions on the REAR WALL TEMPLATE.
□ Tape it to the rear wall.
□ Cut the opening, following the instructions of the REAR WALL
TEMPLATE.
B2. REMOVING BLOWER PLATE
□
Remove and save the screw that holds the blower plate to the
microwave. Lift off the blower plate.
Blower Plate
17
NOTE: Make sure the screws for the blower motor and
blower plate are securely tightened when they are reinstalled.
This will help to prevent excessive vibration.
NOTE: Make sure the motor wiring has been properly routed
and secured, and that the wires are not pinched.
Back of
Microwave
Publicidad
