Assembly Instructions - Gardenline 21994-18 Manual Del Usuario

Fig. 1
K
L
Fig. 3
STEP 8:
Place Small Canopy (K) over upper bars of Canopy Two Tier Ribs (D) so
that pockets underneath canopy fit into those rib ends; see Fig. 1.
STEP 9:
Place Main Canopy (L) over lower bars of Canopy Two Tier Ribs (D)
and canopy ribs. Unfold Main Canopy (L) completely so that pockets
underneath canopy fit into these rib ends; see Fig. 1.
STEP 10:
Place Plastic Rings (N) through grommets found at the top of the
Netting Panels (M) and through the rail found on parts Left Frame (B)
and Right Frame (C); see Fig. 2.
*Note that the stitching found on the netting, as well as a white tag
should be facing inward. Having the panels facing in the wrong
direction will prevent the netting from being drawn open and tied
down to the poles.
Use the ties found at the bottom of the Netting Panels (M) to secure the
panels by running them through the Screw Ring (R) and around the
Poles (A); see Fig. 3.
12
support@tdcusainc.com
MODEL: 22095-18 PRODUCT CODE: 7884

Assembly Instructions

Fig. 2
K
M
AFTER SALES SUPPORT
1800 599 8898
04/2018
USA
N
H
Fig. 1
STEP 11:
Run two Stakes (O) through designated holes found on Feet (H) at the
bottom of each Pole (A). Screw Stakes (O) while inserting them into the
ground for extra stability; see Fig. 1.
STEP 12:
Run Rope (T) through loops found at the tops of the four corners of the
Main Canopy (L). Secure the Rope (T) by tying a knot at this end. Secure
the opposite ends of the Ropes (T) to Stakes (O) also by tying knots; see
Fig. 2. Insert the four Stakes (O) into the ground by screwing them in
place. When completed, the Ropes (T) should be tightly drawn.
AFTER SALES SUPPORT
1800 599 8898
MODEL: 22095-18 PRODUCT CODE: 7884
Assembly Instructions
O
04/2018
USA
T
Fig. 2
O
13
support@tdcusainc.com