Descargar Imprimir esta página

Newlux X120 Smartmotion Manual De Instrucciones página 30

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
speed sensors located in the upper corners of the control panel.
Just place your hands on them simultaneously at a height of 15 cm,
as shown in the picture below.
MODE: You can check your current speed
distance
SPEED: Manually set the desired speed with the '+ ' or ' - ' keys located
above the word SPEED. You can also control the speed using the
speed sensors located at the top corners of the control panel by
placing your hand on them.
The initial speed is 1.0 km/h. The belt can reach a maximum speed
of 12 km/h.
To automatically decelerate to 0 km/h, place your hands
simultaneously on the left and right sensors.
Press P to select the automatic programme you want to use.
IMPORTANT: To stop the belt immediately, place both hands on the
sensors.
|
30
15 cm
y and heart rate
Left sensor
to go slower
on the LED display.
Right sensor
to go faster
, calories , time
,

Publicidad

loading