Switching Off And Transportation; Switching Off; Transporting; Operation - Silvercrest SGB 1380 B2 Instrucciones De Uso

Risk of crush injuries!
When opening and closing the door, do not place
your fingers/hand between the door hinges. They
could be crushed.
➩
Before using the appliance for the first time, it
and all of the accessories must be cleaned free
of possible packaging residues. Clean the ac-
cessories with a handwarm and mild detergent
solution and then dry them ab.
➩
Wipe the appliance housing with a cloth lightly
moistened with water and then dry it carefully.
➩
When the appliance is completely dry inside
and out, insert the plug into a suitable power
socket (220 - 240 V ~ /50 Hz).
➩
Now switch the appliance on, without the ac-
cessories and without foodstuffs. Leave the ap-
pliance door completely open.
➩
Select the setting 230° C with the temperature
regulator 2 . Place the function switch 3 to
upper and lower heat.
➩
Place the time switch 5 at 15 minutes.
The appliance allows itself to be switched on
with the time switch 5 . As soon as the time
switch 5 is set the control lamp 1 glows.
As the heating elements are lightly greased, a
slight smell may occur when first putting them
into operation. This is harmless and stops after
a short time. Open a window and provide for
sufficient ventilation.
➩
When the appliance has switched itself off auto-
matically, place the function switch 3 to OFF .
➩
Remove the plug from the power socket and wait
until the appliance has cooled itself down.
➩
Then clean the grill and baking area with a
cloth lightly moistened with water and then
dry it carefully.

Switching off and transportation

Switching off

➩
Place the function switch 3 and the time switch 5
at OFF. Unplug the power plug from the socket.

Transporting

➩
If you wish to transport the appliance, first allow
it to cool down.
➩
Remove the plug from the power socket.
➩
Wrap the power cable around the retaining
hooks on the rear of the appliance.

Operation

Grilling and baking

➩
Remove the roasting grill 7 and baking tray 8
from the appliance. If required, cover these with
baking paper resp. smear the baking tray 8
with butter or oil.
➩
Allow the appliance to heat up for ca. 10 minutes
(dependant on the setting) to the required tem-
perature:
- Select the required temperature with the tem-
perature regulator 2 .
For grilling, you must always select the highest
temperature setting (230° C).
- Then, select with the function switch 3 either
upper heat (e.g. for toppings), lower heat (e.g.
for cakes) or upper and lower heat (e.g. for Piz-
za). If you want to grill, always select the setting
upper heat with the function switch 3 .
- 47 -