Display Setting - Mark SUPERBAT LED WI 712 Manual De Uso

EN

6.6 DISPLAY SETTING

1) Press the【ENTER】button in 【DISY】menu, then enter to the display setting.
2) Press the【UP/DOWN】button t o select 【ON】，【2 MINITES OFF 】
3) Press the【ENTER】button to escape and save.
6.7 AUTO LOCK KEY SETTING
1) Press the【ENTER】button in 【LOCK】menu, then enter auto lock key setting.
2) Press the【UP/DOWN】button to select 【YES】,【NO】
3) Press the【ENTER】button to escape and save.
Instructions :
When set to [YES] , it will lock automatically after two minutes to prevent accidental triggering flood
flushing, and then press any key for 10 seconds to unlock.
6.8 Battery output setting
1) Press the【ENTER】button in 【BAT】menu, then enter to the Battery output setting.
2) Press the 【UP/DOWN】button to select【HIGH】,【MIDDLE 】, 【LOW】
3) Press the 【ENTER】button to escape and save.
6.9 DMX signal selection setting
1) Press the【ENTER】button in 【SIGN】menu, then enter to the DMX signal selection setting
2) Press the【UP/DOWN】button to select【2.4G 】,【CABLE】
3) Press the【ENTER】button to escape and save.
6.10 Wireless set
1) Press the 【ENTER】button in 【WIRE】menu, then enter to the wireless set
2)【RESET 】
3)【KEY】
6.11 CUSTOM COLOR SETTING
1) Press the 【ENTER】 button in 【CTST】 men u, then enter to the custom color setting.
2) Press the 【UP/DOWN】 select 【CT01】...【CT10】
3) Press the 【UP/DOWN】button to select 【1-512】numerical value.
4) Press the 【ENTER】button to escape and save.
SUPERBAT LED WI 712
.
.
- 11 -
User Manual/Manual de Uso