EFFEKTIV TRIUMPHATOR 2000X Manual De Usuario página 5

Controlling Sewing Speed
For Your Safety:
• While the machine is in operation, always keep your eyes on the sewing
area, and do not touch any moving parts such as the loopers, balance
wheel or needles.
• Always disconnect the machine from the power supply:-when leaving the
machine unattended.-when attaching or removing parts.-when threading
or cleaning the machine.
• Do not place anything on the foot control, except when the machine is
in use.
Operating instruction:
• The symbol "O" of a switch indicates the "off" position of a switch.
8
Sewing speed can be varied by the
foot control.
The harder you press on the control,
the faster the machine runs. Step on
the foot control with the presser foot
lifter up, and practice controlling the
speed.
How to Turn the Balance Wheel
Always turn the balance wheel
toward you (counterclockwise).
 Balance wheel
EN USER MANUAL
To close: (B) Lift the looper cover and push it against the machine. The looper
cover snaps into its position automatically.
Looper cover

TRIUMPHATOR 2000X
Opening and Closing looper
cover
To open: (A) While pushing with the
thumb to the right as far as it will go,
pull the loooper cover toward you.
NOTE: When the looper cover is
opened, the motor will switched off
immediately although the power
switch is at position"1".
Raising or Lowering the Presser
Foot
By raising or lowering the presser
foot lifter, the presser foot goes
down or up.
The presser foot should always be
lowered when sewing, except when
you are threading the machine or
testing it without threading.
NOTE: Raising the presser foot lever
loosens the thread tension.
When the presser foot is lifted, the
motor stops automatically even
though the power button is at
position "I".
Presser Bar Connection Rod

9