Publicidad
Idiomas disponibles
Idiomas disponibles
EN
CONTROLES Y FUNCIONES
1.-
Main unit speaker.
2.-
Battery compartment. Insert a 9 V battery in the main unit which will power the 2 intercoms.
TO SUB: connection with the secondary unit. Use the cable provided.
3.-
9 V DC: main unit power supply input.
4.-
5.-
Main unit volume control.
6.-
LED power indicator of the main unit.
7.-
Call button and push to talk. When the device is switched off, press this button to call the secondary unit. When
the device is switched on, press and hold to talk.
8.-
Main unit power button. When this button is pressed the secondary unit is also activated in hands-free mode to
be able to transmit messages directly to the main unit.
9.-
Secondary unit speaker.
10.- TO MASTER: connection with the main unit. Use the cable provided.
11.- LED power indicator of the secondary unit. The indicator lights up when the main unit is activated, leaving the
secondary unit ready to send messages to the main unit.
12.- Call button. Press this button to call the main unit.
INSTALLATION
- Remove the rear cover of the main unit and insert a 9 V battery making sure that the polarity is correct.
- If you are going to use the intercom for a long period of time, it is recommended that the main unit is powered with
an AC/DC adapter instead of using the battery. The adapter must be connected to the 9 V DC input on the main unit.
- Connect the units to each other using the cable provided.
- The devices can operate on a horizontal flat surface or be hung on the wall using round head screws in the slots on
the rear part of both units.
INSTRUCTIONS FOR USE
FROM THE MAIN UNIT (MASTER) TO THE SECONDARY UNIT (SUB)
- Press the CALL button to send the call signal to the secondary unit.
- Press the POWER button. The LED power indicator will light up in red.
- To talk, press and hold the TALK button. To listen, simply release the button.
FROM THE SECONDARY UNIT (SUB) TO THE MAIN UNIT (MASTER)
- Press the CALL button to send the call signal to the main unit.
- After receiving the reply and activating the main unit, you can speak or listen without having to press the CALL button.
- 2 -
Publicidad
