Publicidad
Idiomas disponibles
Idiomas disponibles
2. FORWARD / REVERSE SWITCH(See Fig. C)
This allows direction to be changed for driving and
removing screws/sockets. Push the bottom of the
rocker switch for driving forward(d) and push the top for
removing screws/reverse(c)
WARNING: Never change the direction
of rotation when the Chuck is rotating,
wait until it has stopped!
3. FULLY AUTOMATIC SPINDLE LOCKING
(AUTO-LOCK) (See Fig. D)
The screwdriver Chuck (4) is locked when the On/Off
Switch (2) is not pressed.
This allows the driver to be used manually when needed.
Important:
When using as a manual tool, do not press the On/Off
Switch (2). Otherwise the screwdriver will be damaged.
4. USING THE LED LIGHT
To turn on the light simply press the On/Off Switch. When
you release the On/Off Switch, the light will be off.
LED light increases visibility and is great for dark or
enclosed area.
5. PROTECTION AGAINST DEEP
DISCHARGING
The Li-ion battery is protected against deep discharging
by the "Discharging Protection System". When the
battery is empty, the machine is switched off by means
of a protective circuit: The chuck no longer rotates. When
this occurs you need to recharge the battery.
MAINTENANCE
Your tool requires no additional lubrication or maintenance.
There are no user serviceable parts in your power tool.
Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation slots clean.
Keep all working controls free of dust. Occasionally you may
see sparks through the ventilation slots. This is normal and
will not damage your power tool.
EN
17
Publicidad
