Sabo 40-ACCU CLASSIC Manual Del Operador página 48

18 TECHNICAL DATA
Engine
Engine
Engine speed
Charger
See the separate operating instructions for the charger.
Permitted temperature range during charging
Battery
See the separate operating instructions for the charger.
Recommended temperature range for storage
Mower
40-ACCU CLASSIC
Housing
Cutting width
Cutting heights
Height-adjustable guide bar
Grass collector capacity
Weight
Length
Width
Height
Wheels front / rear
Bearing front / rear
Permitted temperature range during use
Permitted temperature range for storage
Maximum permitted humidity
45-ACCU CLASSIC
Housing
Cutting width
Cutting heights
Height-adjustable guide bar
Grass collector capacity
Weight
Length
Width
Height
Wheels front / rear
Bearing front / rear
Permitted temperature range during use
Permitted temperature range for storage
Maximum permitted humidity
40 V DC motor
2800 rpm
+ 7 to + 40 °C
+ 5 to + 30 °C
Steel
400 mm
Centre, 25, 35, 50, 70, 80 mm
3 times
40 litres
20.0 kg
1260 mm
440 mm
1040 mm
Ø 150 mm / Ø 180 mm
Cup-and-cone bearing
0 to + 45 °C
- 5 to + 60 °C
70 %, non-condensing
Steel
450 mm
Centre, 25, 40, 55, 70, 80 mm
3 times
60 litres
23.0 kg
1380 mm
530 mm
1040 mm
Ø 180 mm / Ø 180 mm
Cup-and-cone bearing
0 to + 45 °C
- 5 to + 60 °C
70 %, non-condensing
14
Sound power level
40-ACCU CLASSIC
Guaranteed sound power level;
measured according to 2000/14/EC
45-ACCU CLASSIC
Guaranteed sound power level;
measured according to 2000/14/EC
Sound pressure level
40-ACCU CLASSIC
Emission sound pressure level at operator's workplace,
measured according to EN 62841-4-3
Measuring inaccuracies; according to ISO 4871
45-ACCU CLASSIC
Emission sound pressure level at operator's workplace,
measured according to EN 62841-4-3
Measuring inaccuracies; according to ISO 4871
Vibrations
The stated total vibration value has been measured according to a standardised test
procedure and can be used to compare the device with another machine. This value
can be used for a preliminary estimation of the vibration load.
40-ACCU CLASSIC
Vibrations at the guide bar;
measured according to EN 62841-4-3
Measuring inaccuracies; according EN 12096
45-ACCU CLASSIC
Vibrations at the guide bar;
measured according to EN 62841-4-3
Measuring inaccuracies; according EN 12096
19 ORIGINAL SPARE PARTS AND ACCESSORIES
Approved lithium-
ion batteries
All approved lithium-ion batteries are listed in the charger
Approved battery
chargers
Standard charger SAU15033 (Order no. SAA11781)
Safety key
Roller bearing
grease
Cutter bar For safety reasons, the cutter bar must always be replaced by
an authorised workshop. This workshop has the respective
spare part number for the cutter bar available.
L = 91 dB(A)
wa
L = 94 dB(A)
wa
L = 77 dB(A)
pA
L = 80 dB(A)
pA
a
hW
a
hW
SAU15032, SAU16450, SAU17028
(4 Ah, 144 Wh)
(Order no. SAA11780)
SAU17216 (4 Ah, 144 Wh)
(Order no. SAA12800)
SAU17217 (5 Ah, 180 Wh)
(Order no. SAA12774)
SAU16451, SAU17029 (6Ah, 216 Wh)
(Order no. SAA12250)
operating instructions
Quick charger SAU16509 (Order no. SAA16509)
SAA11774
SAA11300
3.0 dB
3.0 dB
= 1.4 m/s
2
0.7 m/s
2
= 2.2 m/s
2
1.1 m/s
2