Publicidad
Idiomas disponibles
Idiomas disponibles
EN
-
Connect all the elements to the power supply and turn them on to start using them.
MASTER SLAVE CONTROL
The master-slave function allows several lights to operate in synchronization (same color and same move-
ments) without the need of a DMX controller.
Cascade the PAR-155CL you want to use.
-
-
Select the slave mode (A001) on every light except the one you want to be the master ("MASTER"). These
lights are referred to as slave lights (SLAVE).
-
At the MASTER light select any of the operating modes other than DMX control.
SECURITY RECOMMENDATIONS
-
Do not under any circumstances access the internal parts of the device.
-
Make sure that the device is at least 50 cm away from flammable substances or elements.
-
Looking at the rays from any distance less that 15 cm can cause serious damage to the eyes, as can
direct exposure to radiation for more than 10 seconds.
-
Continuously switching the unit on and off will result in a decreased life span of the unit.
-
These devices should only be used in areas that are refrigerated and under cover.
-
Do not move or handle the appliance while it is connected to the mains and in operation.
-
Do not modify the lighting elements of the device without technical supervision or with any materials that
are not approved by the supplier.
- 4 -
Publicidad
