Publicidad
Idiomas disponibles
Idiomas disponibles
• HEATING
On this mode the air conditioning unit will be set to on at Heating mode any time any zone is
under demand (T
The available heating modes are:
To set the different heating working mode:
o If you wish Heat pum
o If you wish Heating radiating element
the screen
o If you wish Combined de heating
• DEHUMIDIFICATION
This working mode is only available when system is integrated by means of the Airzone
Communication Gateway. It is the appropriated for those days when humidity is high, as it
reduces the condensation on the supply grilles.
On this mode the system sets the dehumidification mode on the air conditioning unit,
refreshing ambient aiming to reduce the humidity, once any zone is on demand (T
T
). The air conditioning unit will manage the air flow and air supply temperature to keep
ambient
acceptable levels of humidity.
4.2.3 FAN SPEED SELECTION*.
* It will be only available for fancoil installations. On thermostat zone identification and fan speed will be
continuously swapping. Press on the screen of the thermostat anytime it displays Auto,F1, F2, F3.
1) On the main screen, press hold during 2 seconds on the icon Auto, F1, F2, F3.
Thermostat will display fan speed available.
2) Use the selection arrows
confirm with a short press on
To exit fan speed selection process not confirming selection, press
> T
).
Set-Poing
ambient
Heating pumg.
*Heating element.
*Combined heating.
, press once on the heating icon on the screen.
, press twice on the heating icon on
, press hold on the radiant element.
to select the desired fan speed Auto,F1, F2, F3 and
icon.
<
set-point
icon.
47
Publicidad
